External rendering repair in Chandler's Ford

• A rebuilt corner on a Hiltingbury house, and the slim metal angle that keeps that corner straight, sit inside this quote.
• Scaffold for a Valley Park patch above arm's reach from the ground sits inside this quote.
• Paint after the Chandler's Ford coat has hardened is a separate quote. Mending a gutter, a roof covering or a window that let rain behind the face is a separate quote.
• A coat over every outside wall is quoted as External wall rendering. We turn up at the time set for the Chandler's Ford repair. The sum named before any coat is lifted stays the sum for that repair.

View the render repair cost guide for Chandler's Ford

• High render on a Fryern houseWhere a failed patch on a Fryern house sits above arm's reach from the ground, scaffold goes up before the mix is made. Scaffold is a temporary frame that gives a place to stand. Covers go on the glass, on the doors and on the ground under that patch. A patch next to the paving needs no frame. Render has been spread while boards stood at the front of a house. Render has also been spread while boards stood along one flank.
• Hollow coat on a Hiltingbury wallWe knock the Hiltingbury wall from one side of the damage to the other. A dull note means blown render. Blown render is coat that has lifted off the masonry. The face of that coat can still look unbroken. We chalk each dull note. A split that still sticks is raked open and brushed clear, so rain cannot track in behind the coat that stays.
• Firm coat left on a Valley Park wallOn a Valley Park wall we lift away only the chalked coat. Cutting stops where the render around the opening still sticks. Dust is brushed off the masonry that is now bare. That masonry is dampened so the fresh mix can lock on. The mix is made only after that dampening.
• New sand and cement on a Chandler's Ford wallThe mix of sand and cement goes onto the bare masonry at the Chandler's Ford house. A deep opening starts with a scratch coat, the opening layer. A comb is dragged through that layer while it is soft, so the next layer locks into the grooves. A long rule draws each layer out until the build meets the coat around it. Where that coat is smooth, a float rubs the last layer shut. A float is a flat blade. Where that coat is rough, the same roughness is pressed into the wet face.
• Corners on a Chandler's Ford houseA chipped corner on a Chandler's Ford house is built back to a straight line. A broken reveal is rebuilt in the same pass. A reveal is the cheek at the side of a window or a door. A bead, a slim metal angle, is bedded on the corner before the face layer so the line stays straight. The fresh face ends just above the ground. We take the tools away and leave the ground tidy.

1. 1

   Tell us about the job

   Tap Book Now and describe the work in the chat. Photos help.

2. 2

   Get your price

   You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

3. 3

   Choose your visit

   Give your address and when you are free, and the visit is arranged.